Home  | Login  | Register  | Help  | Play 

RE: Making Weapons/spells/armor/shields on Gimp

 
Logged in as: Guest
  Printable Version
All Forums >> [Gaming Community] >> [Legends and Lore] >> Artists of Legend >> Art Academy >> RE: Making Weapons/spells/armor/shields on Gimp
Page 2 of 2<12
Forum Login
Message << Older Topic   Newer Topic >>
1/8/2008 12:51:18   
Krezos
Member

Never said I was the greatest xD BurningRaven is my favourite artist.

Anyway, you really need Flash if you want to help for LoR. I got it for ~$50 (£28.99 in my currency) - which is very reasonable from exisoftware.net. It was a download, not a CD, though.
AQ  Post #: 26
1/8/2008 12:52:21   
ultimation2.0
Member

i am not paying and please post gimp stuff here as i asked for gimp help
AQ DF MQ  Post #: 27
1/8/2008 12:55:20   
Krezos
Member

Hmm, a member of our forums called TreadLight is good with this kind of stuff, so maybe he could help?

< Message edited by Krezos -- 1/8/2008 12:56:01 >
AQ  Post #: 28
1/8/2008 12:57:02   
ultimation2.0
Member

is he a good artist?? Can you contact him for me then please
AQ DF MQ  Post #: 29
1/8/2008 12:59:23   
Krezos
Member

You can find his email adress on Boards of Rorept, although I advise PMing him. He uses Paint.net mostly but has some GIMP experience I believe.
AQ  Post #: 30
1/8/2008 13:01:27   
ultimation2.0
Member

Excellent thanks. BTW i only want to learn how to make weapons so i can help out in the Land of Rorept RPG cause i want to be inside a good RPG
AQ DF MQ  Post #: 31
1/8/2008 22:01:08   
Pie Munchies
Member

To be honest, you aren't going to find a tutorial on "making weapons in GIMP". In fact, you are barely even going to find tutorials on making any sort of drawing-esque thing in gimp. To draw weapons, you need some weapon-drawing talent to begin with, or you need to find weapon-drawing tutorials on your own, which would be hard because it would only give you the basics, and if you want to help in an RPG, you're going to be much more creative than that. After that, you need to learn how to shade the weapons properly, which is probably the hardest part. Making good weapons isn't something you can just decide to do, you need to practice a lot - especially before you apply for a job. Not only that, but GIMP would not work for an RPG because you'd need to convert the .png or .xcf files in to .swf files so that they could work properly in Flash, but that's still not the worst part. If the said RPG has cut scenes like AQ, MQ and DF where they zoom in close on the character, the weapons will get extremely pixelated. So basically, what I'm trying to say is that you aren't going to be able to help people making a Flash RPG using GIMP. At the very least, you're going to need a VECTOR program. So, here are your options for programs that are going to work:
Photoshop (Costs a lot)
Illustrator (Costs a lot, but not as much as PS)
Flash (Already Discussed)
Inkscape (Free, but complex)

So anyway, according to your needs, the only program that would work for you is Inkscape, and that's assuming that you somehow know how to change Inkscape's file type image format to a .swf. So anyway, now you know how hard this is going to be.
AQ  Post #: 32
1/10/2008 19:44:04   
Peregrine Falcon
Member

wow wow... pie munchies back up there... since when did PS become a VECTOR program ( if u dont consider the shape tools and pen tools)

its kinda hard to draw with those tools... for me at least...

anyways, could u give me the link to INKSCAPE? cuz i wanna see if it is good...

also ultimation, this is how i create my weapons:

- draw basic shape in paint
- i take it to PS and then i colour it/ 3D it and all other fancy things...

to my knowledge, u can do the things listed above in gimp too... but i dont have gimp... so i wouldn't know...
AQ DF  Post #: 33
1/11/2008 17:20:48   
drmrboy111
Member

I can help u a lot with this subject.
Things you need-
Pencil and Paper
GIMP (with moderate skill)
Scanner

Step One- Draw the image on paper.
Step Two- Scan it into GIMP
Step Three- Make a new transparent layer on top of the scanned picture
Step Four- Use the paths tool to make the lineart (I suggest This Tutorial if you don't know how to use the paths tool. This tutorial is for people , but it will work just the same with weapons. My tip is to make sure you use a pencil for stroking, not a brush. Use a pencil with the thickness 1.0 for stroking or smaller.
Step Five- After you finish your lineart, delete the scanned in layer and make a duplicate of the lineart. The top layer of lineart has to get it's transparency locked.
Step Six- Color in and shade the weapon on the bottom layer of lineart.
Step Seven- Color in the lines with a darker color than the rest on on the top layer.
Step Eight- Save it twice, one as an .xcf and one as a .png
Step Nine- Pat yourself on the back for a good job, and upload the image.

I have been dying to share this with a fellow GIMPer. Good luck. A couple of tips I can give is that you have to determine a light source for the weapon. Also, I think that you should vectorize the image after you are done with it at This Site Have fun.
DF  Post #: 34
1/13/2008 0:22:23   
Pie Munchies
Member


quote:

ORIGINAL: jpx111

wow wow... pie munchies back up there... since when did PS become a VECTOR program ( if u dont consider the shape tools and pen tools)


PS is a program that can create vector images, therefore, it is a vector program. It does not have all of the vector gadgets that Illustrator does, but it works fine. The definition of a vector, as you probably know is a computerized image that is not pixelized, which makes it infinitely expandable without distorting it. As for Inkscape, Google is your friend.
AQ  Post #: 35
1/15/2008 17:04:43   
Peregrine Falcon
Member

thanks pie munchies for the website. downloading the program right now.

yes i knew what vectorizatioon was. but... do u know how they do it?... i mean how is is it possible to zoom in without losing clarity?...

AQ DF  Post #: 36
1/18/2008 16:50:55   
Sanguine
Member

Actually, involving some of the remarks mentioned above, GIMP can make some quite nice weapons. I've used GIMP myself to make weapons before. It might take time but it can make some really beautiful weapons if you have the drive.
Post #: 37
1/18/2008 17:52:25   
Dabbleh
Member

GIMP can vector, but you have to know the controls back to front. I will show you a sword I made from a sketch on GIMP. *Finds*

Magik Sword - I need to fix the white choppy line between the outline and gradients. I think it turned out rather well for a simple vector.

V1

< Message edited by Dabbleh -- 1/18/2008 17:58:29 >


_____________________________

rawr from nolraitru
AQ  Post #: 38
1/18/2008 17:54:08   
numa1234
Member

whats gimp?
MQ  Post #: 39
1/18/2008 17:55:11   
Bone_funny
Member

its an art/image manipulation program
AQ DF MQ  Post #: 40
1/18/2008 18:01:34   
Dabbleh
Member


quote:

ORIGINAL: numa1234

whats gimp?



Please keep to the thread topic.
AQ  Post #: 41
12/7/2010 16:58:52   
fishb8123
Member

i really dont know how to make any weapons and all i have is gimp
i need a detailed toturial or better (a video)
Epic  Post #: 42
Page:   <<   < prev  1 [2]
All Forums >> [Gaming Community] >> [Legends and Lore] >> Artists of Legend >> Art Academy >> RE: Making Weapons/spells/armor/shields on Gimp
Page 2 of 2<12
Jump to:






Icon Legend
New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts




Forum Content Copyright © 2018 Artix Entertainment, LLC.

"AdventureQuest", "DragonFable", "MechQuest", "EpicDuel", "BattleOn.com", "AdventureQuest Worlds", "Artix Entertainment"
and all game character names are either trademarks or registered trademarks of Artix Entertainment, LLC. All rights are reserved.
PRIVACY POLICY


Forum Software © ASPPlayground.NET Advanced Edition